Vidikron 85 Projection Television User Manual


 
Operation
Vidikron Vision 85 Owner’s Operating Manual 65
PRE
L
IMINAR
Y
Picture AdjustTo perform basic picture quality adjustments, select Picture Adjust from the Main Menu and
proceed as follows:
Picture Memory: The Vision 85 lets you save image quality settings as presets that you can
recall at a later time. For digital 1080i and 1080p sources, you can create up to six presets.
To recall and/or change the settings associated with a preset, select Picture Memory from the
Picture Adjust menu. Press or ENTER, then press or until your choice is highlighted.
To confirm your selection, press ENTER.
The default settings for each preset are described in Table 4-2. Contrast, Brightness, Color,
Tint and Sharpness are all set to zero (0) by default. These provide convenient starting points
for calibrating the projector to suit different viewing environments. Any picture quality
adjustments you make here are stored in the currently-selected preset.
Picture Memory 1
Contrast 0
Brightness 0
Color 0
Tint 0
Sharpness 0
CLR Temp. 6500
White Balance 1
VAC 1
Lamp Power Hi
Advanced Menu
Reset to Defaults
Picture Adj.
Table 4-2. Default Picture Memory Settings for Digital 1080i and 1080p
Sources
Picture
Memory
Setting
Description
Default Settings for Selected Picture Memory
Remote Control Key
Color Temp.
VAC (Iris)
Lamp Power
Sharpness
Enhancement
Auto Contrast
Standard Provides good picture
quality under the widest
variety of viewing
conditions.
7500 High
Brightness
Hi
(220W)
Off Off
Custom 1 Similar to “Standard” mode,
but with enhanced black
levels.
7500 CRT
Emulation
Hi
(220W)
Off 1 CUST
1
Custom 2 Similar to “Standard” mode,
but with enhanced white
levels.
7500 High
Brightness
Hi
(220W)
1 Off CUST
2
ISF Day For viewing images with the
brightness slightly
decreased in a darkened
room.
6500 Theater Low
(180W)
Off Off ISF
DAY
ISF Night For viewing images with the
brightness slightly
increased in a darkened
room.
6500 CRT
Emulation
Low
(180W)
Off Off ISF
NIGHT
THX Mode Similar to “Standard” mode,
but sets the color
temperature to 6500K.
6500 High
Brightness
Hi
(220W)
Off Off