Vivitek dw6831 Projection Television User Manual


 
21
DU6871/DW6851/DX6831 DLP Projector - User's Manual
Connecting to AC Power Supply
The AC power cord is included in the box, plug the power cord to the AC socket (AC100V-
240V) on the back of the projector and plug another end of the AC power cord to the AC
outlet�
Note:
• Makesurethepowersystem(includingtheprojectandpowersupplysystem)isproperlygroundedbefore
connectingtotheACpower.Theprojectormaybedamagedwithoutthegroundingcircuit.
• Thisisahigh-brightnessandhigh-wattprojector.DonotmodifytheACpowercordorreplacethepower
cordarbitrarilytoavoidcausingdamagestotheprojectororsafetyproblems.
Turn on
Press ON on the remote control or POWER on the projector� The power and lamp LED
indicator ashes green to show warm-up.
MENU EXIT
POWER
INPUT
AUTO
SYNC ASPECT
or
The power and lamp LED indicator will light green and the projector lights turn on when the
projector is ready for use. Refer to the chapter of LED statuses if the LED indicator ashes
red� Please contact the Vivitek licensed dealer if the problem cannot be solved�
Starting to Use the Projector Setup