Vivitek dw6831 Projection Television User Manual


  Open as PDF
of 54
 
41
DU6871/DW6851/DX6831 DLP Projector - User's Manual
HDBaseT: Transmission is conducted from the external HDBaseT to the RJ-45/
HDBaseT port on the projector� The transmission rate is switched to 9600�
Note:
• WhentheStandbyModeissettotheEcoMode,theLANandRS-232controlfunctionisturnedoff.
Therefore,theprojectorcanonlybeturnedonusingtheremotecontrolorthebuttonontheprojector.
BeforeusingRS232orLANcontrol,settheStandbyModetoStandard.
• Startup Logo
Use the ◄► function to turn on/off the Startup Logo.
• Trigger
The projector is provided with a set of trigger output� When automatic screen equipment
is available, connect it to the screen trigger of the projector using the cable� The screen
automatically turns on when the projector is powered on� There is a 2-3 second delay
before this function is activated�
5:4: When the 5:4 aspect ratio is selected, the trigger outputs 12V power�
4:3: When the 4:3 aspect ratio is selected, the trigger outputs 12V power�
16:10: When the 16:10 aspect ratio is selected, the trigger outputs 12V power�
16:9: When the 16:9 aspect ratio is selected, the trigger outputs 12V power�
1�88: When the 1�88 aspect ratio is selected, the trigger outputs 12V power�
2�35: When the 2�35 aspect ratio is selected, the trigger outputs 12V power�
Letterbox: When the aspect ratio having the letterbox shape is selected, the trigger
outputs 12V power�
Standard: When the native aspect ratio is selected, the trigger outputs 12V power�
Unscaled: When the unscaled aspect ratio is selected, the trigger outputs 12V power�
Auto: The trigger automatically outputs 12V power�
• Auto Search
Use the ◄► function to turn on/off Auto Search.
• Dynamic Black
Use the ◄► function to turn on/off Dynamic Black.
• 3D
Set the 3D format and sync method� The projector detects the type of the connected
input signal and provides relevant options for setting� The unavailable option is displayed
using light green texts� Before performing the 3D setting, ensure that the input signal is
connected� When there's no input signal, no 3D setting shall be performed�
INPUT
SERVICEALIGNMENTLAMP
PICTURE
DLP Link
3D Swap
3D 24Hz Display
3D Format
Off
Auto
Side by Side
Top / Bottom
Standby Mode
Auto Power off
Network
Auto Power On
Startup Logo
RS232
Trigger
< Off >
Enter
Dynamic Black
Auto Search
Language
3D
< Off >
< Off >
Enter
Enter
< Standard >
< Off >
Enter
< Off >
< Off >
< On >
Execute
Execute
Execute
Execute
Frame Sequential
Execute
< Normal >
< 96Hz >
CONTROL
3D Format
Enter
3D
 previous next