Vivitek dw6831 Projection Television User Manual


 
39
DU6871/DW6851/DX6831 DLP Projector - User's Manual
OSD Menu - CONTROL
Standby Mode
Auto Power off
Network
Auto Power On
Startup Logo
RS232
Trigger
< Off >
Enter
Dynamic Black
Auto Search
Language
3D
< Off >
< Off >
Enter
Enter
INPUT
SERVICEALIGNMENT
CONTROL
LAMP
PICTURE
< Standard >
< Off >
Enter
< Off >
< Off >
Standby Mode
Use the ◄► function for "Standard" or "Eco" setting.
Standard Model: The projector can be turned on using the remote control, RS-232
command or network control�
Eco: The projector maintains in the standby status at the lowest power (<0�5W)� In this
mode, the projector can be turned on only using the power switch on the remote control
or projector�
Auto Power Off
This function is set to OFF by default� When it is set to ON and no input signal is
received within 20 minutes, the projector will turn off automatically�
Auto Power On
This function is set to OFF by default� When it is set to ON, the projector will turn on
automatically when you connect it to an AC power source� When you plug the power
cable of the projector in an AC socket attached with a switch, you can use this function
and the power switch (instead of the remote control) to turn on the projector� Set this
function to OFF if you do not need to use it�