Filter
Top Products
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
6 - User's Manual
Status LED
The LED indicates the status of the Network Video Recorder�
LED Status Indication
Power Green Power on
Off Power off
POE Green Normal
Off Power off / POE fail
Status Green Normal
Blinking red Upgrading firmware
HDD (Hard disk) Blinking green Hard disk is accessed
Red Hard disk full or error
WAN On With connection
Off No connection
Blink Activity on WAN port
LAN1 On With connection
Off No connection
Blink Activity on LAN port 1
LAN2 On With connection
Off No connection
Blink Activity on LAN port 2
LAN3 On With connection
Off No connection
Blink Activity on LAN port 3
LAN4 On With connection
Off No connection
Blink Activity on LAN port 4
Hardware System Requirement
Computer:
■ Microsoft Windows XP Professional SP2 or above
■ Internet Explorer 6�0 or later
Hard disk:
SATA hard drive for up to 1TB
Hardware Reset
There is a indented reset button on the back panel of the Network Video Recorder� It is used to
reboot the Network Video Recorder or restore the Network Video Recorder to factory default�
Sometimes rebooting the Network Video Recorder could set it back to normal state� If the
problems remain after rebooted, restore the Network Video Recorder to factory default and
install again�