Filter
Top Products
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
40 - User's Manual
2. See below for the steps to insert a Video Server along with its subordinate cameras.
2-1. You can deselect the Auto checkbox to enter a name for the Video Server. If set to Auto and your
video server already has a name, that name will be displayed in your device list.
2-2. Enter the Address of the video server - or - use the Search
button to open a Search window.
2-3. If you enter its address and it is found after you click on the Detect Model
button, its Model
Name and MAC Address will be listed.
2-4. Before you click the Detect button, you should enter the User Name and Password for access
to the video server. You should also confirm the Configuration Protocol, Configuration Port,
Streaming Protocol, and the rest of the networking parameters.
2-5. You may select or deselect the checkbox in front of the recording storage option - or - use the pull-
down menu to select the default group or a pre-congured storage group.
You might use the Connection Test button to verify if the stream comes from the device you prefer.
2-6. Click Insert to include the video server to your conguration.
The Video Server should now be listed on the Camera List.
You can also use the Search button to poll the local area network for VIVOTEK's devices. You can
select to list all cameras or list those that have not been included in your current conguration.
Click on a device, and its detailed information will immediately appear in the Camera Management
window on the left. For recording settings, please refer to page 34 as previously described.
1
2
3
4
5
6
1
2