Filter
Top Products
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 81
How to Edit Recording Groups
By default, all devices are assigned to the default recording group. You can manually remove
a device from the default recording group. However, only those devices which belong to a
recording group can produce recorded media les.
Another purpose of setting recording group is that you can divide all the managed devices into
several recording groups, and for each recording group, you can assign several hard-disks (with
recording paths) to store media data. The live media data will be stored in the first assigned
hard-disk initially, and when the available space of the first hard disk reaches the preset
reserved space limit, the media data will be stored in the second disk and so on. If the available
space of the last disk reaches the reserved space limit, the recorded les in the rst disk will be
overwritten with the new media data. This procedure is called "Cyclic Recording".
Recording Storage Settings
Please follow the steps below to set up recording groups for a station:
a. Select the target station from the hierarchical management tree.
b. Click Conguration > Station Settings > Recording Storage Settings on the menu bar (or right-
click the station on the hierarchical management tree and select Station Settings > Recording
Storage Settings). You can also right-click DefaultGroup under the station and click Recording
Storage Settings since all devices are assigned to the Default Recording Group by default settings.
c. The Recording Storage Settings window will pop up.
b
a
b
b