Filter
Top Products
2
1
E320VT/E370VT/E420VT
Installing the TV on a Wall
To mount your TV on a wall, you will need a wall mount. Consult the information
below to find the appropriate mount for your TV model:
E320VT E370VT E420VT
Screw Size: M6 M6 M6
Screw Length: 20mm 20mm 20mm
Screw Pitch: 1mm 1mm 1mm
Hole Pattern: 100mm x 100mm 200mm x 200mm 400mm x 400mm
Installing a TV on a wall requires lifting. To prevent injury or damage
to the TV, ask someone to help you.
Be sure the mount you choose is capable of supporting the weight of the TV. After
you have determined that you have the correct mount for your TV, you can begin
the installation.
To install your TV on a wall:
1. Disconnect any cables connected to your TV.
2. Place the TV face-down on a clean, flat, stable surface. Be sure the surface
is clear of debris that can scratch or damage the TV.
3. Using a philips-head screwdriver, remove the base by loosening and
removing the screws.
4. Attach your TV and wall mount to the wall, carefully following the
instructions that came with your mount.
Use only with a UL-listed wall mount bracket rated for the weight/load of
this TV. See
Appendix A - Specifications
for the weight of this TV.
3. Using a phillips-head screwdriver,
attach the base to the TV by inserting
and tightening the 4 included screws.
Do not insert or tighten these 4 screws without the base attached.
4. Move the TV with attached stand into
an upright position and place on a flat,
level, and stable surface.
5. To ensure proper ventilation, leave at
least 1” of space between the back of
the TV and any other objects (walls,
etc).
1”