Vizio E3D420VX Flat Panel Television User Manual


  Open as PDF
of 56
 
5
17
E3D320VX/E3D420VX/E3D470VX
AdjustingtheAdvancedPictureSettings
To adjust the advanced picture settings:
1. From the Picture Settings menu, use
the Arrow buttons on the remote to
highlight More, then press OK.
2. Use the Arrow buttons on the remote
to highlight Advanced Picture, then
press OK. The Advanced Picture menu
is displayed.
3. Use the Arrow buttons to highlight
the setting you wish to adjust, then
press Left/Right Arrow to change the
setting:
• NoiseReduction-Diminishes
artifactsintheimagecausedby
thedigitizingofimagemotion
content.SelectOff,Low,Medium,
orHigh.
• ColorEnhancement-Reduces
oversaturationofsomecolorsand
improveseshtones.SelectOff,
Normal,RichColor,Green/Flesh,andGreen/Blue.
• AdaptiveLuma-Adjuststheaveragebrightnessofthepictureto
compensateforlargeareasofbrightness.SelectOff,Low,Medium,
Strong,orExtend.
• FilmMode-Optimizesthepictureforwatchinglm.SelectAutoorOff.
• BacklightControl-SelectOff,DCR(DynamicContrastRatio),orOPC.
• AmbientLightSensor-Theambientlightsensordetectsthelight
levelsintheroomandautomaticallyadjuststhebacklightforthebest
picture.SelectOnorOff.
4. When you have finished adjusting the Advanced Picture Settings, press the
EXIT button on the remote.
ResettingthePictureSettings
To reset the picture settings to the factory default settings:
1. From the Picture Settings menu, use the Arrow buttons to highlight More,
then press OK.
2. Use the Arrow buttons on the remote to highlight Reset Picture Mode,
then press OK. The TV displays, “Are you sure you want to RESET Picture
Settings to the factory defaults?”
3. Highlight Yes and press OK.
4. Press the EXIT button on the remote.
 previous next