Filter
Top Products
www.VIZIOCE.com
Version- 10/5/05
53
VIZIO L37 HDTV User Manual
3.6 - Programming the VIZIO Universal Remote Control
You can program the remote control to work with up to four different components. Listed below are the steps
for programming your VCR, Cable Box and DVD Player.
3.6.1 - Programming for VCR
1. Manually turn on the VCR.
2. Press the VCR button on the remote control.
3. Press and hold the SETUP button until the LED LIGHT flashes twice.
4. Find the programming code for your VCR in the code list in the back of this book and enter it using the
Number Buttons. If the code is accepted, the LED flashes twice after the last digit is entered.
If the LED does not flash twice, repeat Steps 2 through 4 with the next code listed for the component and
manufacturer.
5. Point the remote control at the VCR and press the POWER button. The VCR will turn off.
Note:
a) If your VCR does not respond, try all the codes for your brand. If the codes do not work, or your
brand is not listed, see “Searching for Component Codes.”
b) Sometimes a code listed will only include limited functions. Try other codes that may include more
functionality.