VIZIO VA320M User’s Manual
Version 5/19/2009 43
www.VIZIO.com
Maintaining and Troubleshooting
Maintenance
Important
1. Make sure that the power cord is removed from the socket before cleaning your HDTV.
2. Do not use volatile solvents (such as toluene, rosin, and alcohol) to clean your HDTV. Such
chemicals may damage the housing, screen glass, and remote control, and cause paint to peel.
Cleaning the Housing and Remote Control
1. Use a soft cloth for cleaning.
2. If the housing or remote control is especially dirty, use a soft cloth moistened with diluted neutral
cleaner to clean the display. Squeeze water out of the cloth before cleaning to prevent water from
penetrating into the housing. Wipe the display with a dry cloth after cleaning.
Cleaning the Screen
1. Use a soft cotton cloth to gently clean the screen.
2. The screen glass is very fragile. Do not scrape it with any sharp object. Do not press or tap the
screen or it may crack. When the screen is seriously contaminated, use a soft cloth moistened
with a diluted neutral cleaner to clean the display. Squeeze water out of the cloth before cleaning
to prevent water from penetrating into the housing. Wipe the display with a dry cloth after
cleaning.
Reattaching the base
1. Lay the TV face down on a flat, level surface free from any debris.
2. Position the neck base by lining up the eight screw holes with those on the back of the TV.
3. Insert the eight screws and tighten.
4. Lift the TV to an upright position.