Filter
Top Products
4
22
Changing the Audio Language
This setting changes the spoken language on a played disc.
Not all languages are available on all discs. Most discs have
only one or two audio languages available.
To change the disc’s audio language:
1. From the Language menu, use
the Up/Down Arrow buttons
on the remote to highlight Disc
Audio and press OK.
2. Use the Arrow buttons on the remote to highlight a
language of your choice and press OK.
Changing the Subtitle Language
This setting changes the default subtitle language when playing
a disc.
To change the subtitle language:
1. From the Language menu, use
the Up/Down Arrow buttons
on the remote to highlight Disc
Subtitle and press OK.
2. Use the Arrow buttons on the remote to highlight a
language of your choice and press OK.
BD-LIVE STORAGE
When a USB storage device is connected to the USB port, the
player can use its memory for BD-Live storage.
To view the available BD-Live storage:
1. From the System menu, use the
Up/Down Arrow buttons on
the remote to highlight BD-Live
Memory and press OK.
Selecting Format will clear all BD-Live content stored on the USB
storage device.
USING DISC PLAYBACK MEMORY
Disc bookmarks are used by the player to resume playback at
the point the disc was halted.
To enable or disable Disc Playback memory:
1. From the Playback menu, use
the Up/Down Arrow buttons
on the remote to highlight Last
Memory and press OK.
Then highlight On or Off to
enable/disable Disc Playback
Memory.
You cannot “undo” a memory erase, but it will not damage the
player in any way.