Filter
Top Products
VIZIO VP50HDTV User Manual
Version 4/17/2007 16
www.VIZIOCE.com
For Cable or Satellite Boxes with DVI: :
1. Turn off the power to the Plasma TV and HDTV Set-Top Box.
2. Using a HDMI-DVI cable, connect the DVI end to your HDTV Set-Top
Box and the HDMI end to the HDMI 1 Input (white color area) at the rear
of the Plasma TV.
3. Using an audio cable (white and red connectors), connect the cable to
the audio output connectors associated with the DVI output on your
HDTV Set-Top Box and connect the other end to the audio connectors
associated with the HDMI 1 input (white area) at the rear of the Plasma
TV.
4. Turn on the power to the Plasma TV and HDTV Set-Top Box.
5. Select HDMI 1 using the INPUT button on the remote or side of the
Plasma TV, or directly by pressing the HDMI button on the Remote
Control.
Note: The HDMI Input is for HD Video and will only support 640x480 at 60Hz from a PC. Use the RGB
PC input for a greater selection of PC formats.
Note:
a) The HDMI input on the Plasma TV supports High-bandwidth Digital Content Protection
(HDCP). HDCP encrypts the transmission between the video source and the digital display
for added security and protection.
b) If you are already using the HDMI 1 input for another component, or you do not want to use
the HDMI 1 input for the Set-Top Box, you can connect the Set-Top Box to the HDMI 2
connections.
c) Refer to your HDTV Set-Top Box user manual for more information about the video output
requirements of the product or consult your cable or satellite operator.