Filter
Top Products
VIZIO VP50HDTV User Manual
Version 4/17/2007 44
www.VIZIOCE.com
3.4.4 Setting a Password
You control access to the Parental Control features with a password. The default password is “0000”.
You can change the password to any four-digit number.
To change the password:
1. Press the MENU button to open the
main On Screen Display (OSD) menu.
2. Press the button on the remote
control three times until the Parental
Control menu opens. Press OK.
3. Enter your password. If you have not
set a password, use the Number
Buttons to enter the default password
“0000”.
4. Press the button on the remote
control to highlight Change Password.
Press OK.
5. Enter your new password.
6. Enter the new password again in the
Confirm area.
7. Press OK.
8. Press MENU repeatedly to exit the
menu.
To reset the password:
1. Press the MENU button on the remote control and the Main Menu will be displayed on the
screen, as shown opposite.
2. Press until the Parental Controls menu is highlighted. Then press OK.
3. When the first box is highlighted in the Password option, press the and buttons
in the exact sequence.
4. Then press the OK button.
5. The password has now been reset to “0000" and the following message will appear.
Note:
a) Make sure you write down and store the new password in a secure place. The reset
option in the Special Features menu (Section 3.5.9) does not reset the password.
b) The DTV Parental Control password will always be the same as this one.