Filter
Top Products
24
5
XVT3D500CM / XVT3D580CM
Adjusting the Audio Settings
To adjust the audio settings:
1. Press the MENU button on the remote.
The on-screen menu is displayed.
2. Use the Arrow buttons on the remote
to highlight the TV Settings icon and
press OK. The TV Settings menu is
displayed.
3. Use the Arrow buttons on the remote
to highlight Audio and press OK. The
Audio Settings menu is displayed.
4. Use the Arrow buttons to highlight
the setting you wish to adjust, then
press Left/Right Arrow to change the
setting:
• Audio Mode - Allows you to
select the current equalizer preset.
Choose from Flat, Rock, Classical,
and Jazz. These presets can
be customized in the Equalizer
Settings menu. SRS StudioSound
must be set to Standard to use
this setting.
• Balance - Adjusts the loudness of the audio output from the left and
right speakers.
• Lip Sync - Adjusts the synchronization between the display image and
the accompanying audio track.
• TV Speakers - Turns the built-in speakers on or off. You may want to
turn the speakers off if you are using a home audio system.
• SRS StudioSound HD - StudioSound HD™ is a surround sound
solution which delivers immersive surround sound from the TV’s
internal speakers. Additionally, StudioSound HD completes the
entertainment experience by maintaining a steady volume while
watching programming and movies, providing deep, rich bass, crisp
details, and clear dialog. Select Surround or Standard.
• SRS TruVolume - TruVolume™ intelligently normalizes volume
uctuations due to television commercials or channel changes. Select
On or Off.
• Advanced Audio - See
Adjusting the Advanced Audio Settings on
page 25
.
• Bluetooth Audio - When a Bluetooth audio device is paired to the TV,
you can enable audio output to the device with this setting. Select On
or Off.
• Equalizer Settings - Adjusts the boost or attenuation of different
frequencies. Change the equalizer presets by selecting Flat, Rock, Pop,
Classical, or Jazz. To customize the equalizer settings yourself, set EQ
Mode to Advanced, then adjust each frequency setting. (This setting is
only available when SRS StudioSound HD is set to Standard.)
• Reset Audio Mode - Restores the audio settings to the factory
defaults.
5. When you have nished adjusting the audio settings, press the EXIT button
on the remote.