Westinghouse SK-32H590D TV DVD Combo User Manual


 
32
2-7 Reset Audio
Reset all Audio sub-menu options to the factory defaults.
MENU OPERATION
2-6 Audio Only.
Audio Only is a listening mode by turning off the LCD backlight and allowing the current input’s audio to remain
“on” for listening. You can enable Audio Only mode from OSD menu.
On: enable Audio Only mode.
When Audio Only is on, LED light shows blue.
Note: Volume +, Volume -, Right Arrow, Left Arrow, and Mute on the remote control can still control the
system volume level as a normal operation.
Cancel: disable Audio Only mode
Audio Only model could be disabled via below.
a. Select Cancel on Audio Only sub-menu.
b. Single button push on the remote control or side control keys excluding Volume +, Volume -, Right
Arrow, Left Arrow, and Mute. These buttons function as normal audio adjustment.
c. No Signal Detected
If a source is powered off or video cable is unplugged, Audio Only would be disabled.
d. New signal detected by Autosource
When a new signal is detected by Autosource, Audio Only will be disabled.
e. Rating Locks on Parental Controls are set.
Audio Only is disabled, TV system continues to block both video and audio as normal.