Westinghouse LTV-40w1 TV DVD Combo User Manual


 
24
English
Troubleshooting
No Power
Make sure power button is ON (Blue LED ).
Make sure AC power cord is securely connected to the AC socket.
Plug another electrical device (such as a radio) to the power outlet to verify that the
outlet is supplying the proper voltage.
Parental Control Password is “Lost”
In the unlikely occurrence, select “ PASSWORD EDIT” and enter “0000” to reset the
password.
Audio Interconnection Issues
Remember that S-Video and Composite (AV) share the same audio source.
Power is ON but No Screen Image
Make sure the video cable connected to the LCD TV DVD combo is tightly secured
to the video output port on the back of the computer. If the other end of the video
cable is not attached properly to the LCD TV DVD combo, secure it tightly.
Adjust brightness and contrast.
If you are using a Macintosh computer older than G3, you need a Macintosh
adapter.
Check Source settings.
Wrong or Abnormal Colors
If any colors (red, green, or blue) are missing, check the video cable to make sure it
is connected securely. Loose or broken pins in the cable connector could cause an
improper connection.
Connect the LCD TV DVD combo to another computer.
Remote Control Buttons Do Not Work
Press only one button at a time.
Snow Appears on Screen
Check your antenna connection.
Check the TV / CATV selection.
No Sound
Check the audio connection.
Press MUTE on the remote control, so that MUTE disappears from the screen.
Check the audio settings. The LCD TV DVD combo audio may be set to SAP or
minimum.
Press the Volume + (Up) key on the remote control.
Make sure that headphones are not connected to the Headphone Jack on the LCD
TV DVD combo.
Make sure the speaker setting is set to “internal”.