6 Installation
MAN0708 (4/11/2008)
Install Front Mounts
With Woods LS84 Loader Mount
Attach front mount (10) to the right loader mount
using two cap screws (32), four hardened flat wash-
ers (29) and two hex nuts (23).
10. 1026846 Front mount (LS84 only)
23. 230 5/8 NC Hex nut
29. 57817 5/8 Hardened flat washer
32. 902 5/8 NC x 2 HHCS GR5
Figure 3. Front Mount Installation
With New Holland 7308, 110TL Loader Mounts or
Woods LC96, LC102, 1009, 1012 Loader Mounts
1. Remove two bolts connecting right and left loader
mount/mid-mount mower bracket to the tractor
frame. See Figure 4.
2. Attach left front mount (9) to tractor using two cap
screws (24) and hardened flat washers (29).
3. Attach right front mount (8) to tractor using two
cap screws (25) and hardened flat washers (29).
8. 1026847 Front mount (OEM)
9. 1013475 Left front mount
24. 307429 M16 x 2.0P x 55 mm HHCS
25. 307430 M16 x 2.0P x 70 mm HHCS
29. 57817 5/8 Hardened flat washer
Figure 4. Remove Hardware - Left Side Shown
Figure 5. Left Front Mount Installed
Figure 6. Front Mount Installation
Remove
DP3
Woods Left
Loader Mount
24
29
9
DP4