Installation 9
MAN0715 (Rev. 10/31/2008)
1028360 HOSE KIT
Install Fittings and Hose
1028360 Hose Kit is used to connect backhoe
hydraulic hoses to the tractor rear hydraulic valve and
the Woods loader control valve.
1. Attach adapter (4), adapter (5) and female quick
coupler (6) into the opening on the hydraulic valve
at the rear of the axle.
2. Attach male quick coupler (7) to hose (1).
3. Attach opposite end of hose (1) to the PBY hose
from the loader control valve.
4. Route hose (1) over rear axle and out the back of
the tractor.
1. 1028358 Hose, 60" x 3/8 NPTM x 7/8 JICM
4. 1010920 Adapter, M22 x 3/4 JICM
5. 315036 Adapter, 3/8 NPTM x 3/4 JICF
6. 64299 Quick coupler, female 3/8
7. 64300 Quick coupler, male 3/8
Figure 10. Hydraulic Valve Fittings Installed
Figure 11. Bulkhead Bracket Installation
Install Hoses to Backhoe Valve
1. Attach adapter (3) to the IN and OUT ports on the
backhoe control valve.
2. Attach female quick coupler (6) to hose (2).
Attach opposite end of hose to the IN port on the
backhoe valve.
3. Attach male quick coupler (7) to second hose (2).
Attach opposite end of hose to the OUT port of
backhoe valve.
2. 1013325 Hose, 48" x 3/8 NPTM x 3/4 JICF
3. 316016 Adapter, 3/4 JICM x 7/8 ORBM
6. 64299 Quick coupler, female
7. 64300 Quick Coupler, male
Figure 12. Backhoe Hose Connection
5
6
4
DP5
DP10