Filter
Top Products
12 INSTALLATION
MAN0047 (9/15/00)
SUB-FRAME & BACKHOE to TRACTOR Cont.
Attach Top Link
1. Assemble inner top link (2), 1” hex nut (1), and
outer top link (3).
2. Attach top link (inner link end) to backhoe main-
frame with 1.0 x 4.5 clevis pin (4) and klik pins (5)
as shown in Figure 14.
3. Adjust top link as necessary to fit between the
backhoe mainframe and tractor top link bracket.
4. Attach outer link end to tractor top link bracket
using original tractor top link pin as shown in Figure
15.
5. Tighten 1” hex nut (1).
1. 3132 1” Hex nut
2. 38645 Inner Top Link
3. 1001579 Outer Top Link
4. 45087 1.0 x 4.5 Clevis Pin
5. 62043 1/4 x 1-3/4 Klik Pin
6. -------- Tractor Klik Pin
7. -------- Tractor Top Link Pin
Figure 13 Top Link Assembly
Figure 14 Top Link to Backhoe Installation
Figure 15 Top Link to Tractor Installation
(Typical Installation)
$WWDFK WR
EDFNKRH
$WWDFK WR
WUDFWRU