Filter
Top Products
4 INSTALLATION
MAN0047 (9/15/00)
SUB-FRAME INSTALLATION Cont’d
n If you do not understand any part of this manual
and need assistance, see your dealer.
n Always wear relatively tight and belted clothing
to avoid entanglement in moving parts. Wear sturdy,
rough-soled work shoes and protective equipment
for eyes, hair, hands, hearing, and head.
* Operator’s seat must be located in the lowest and
most forward position to obtain 40” minimum radius.
Figure 1 Sub-Frame Clearance
TRACTOR PREPARATION
1. Refer to the WOODS BH9000 Backhoe Opera-
tor’s Manual for backhoe assembly instructions.
NOTE: For installing this sub-frame, reference to
right, left, forward and rearward directions are
determined from the operator’s position in the trac-
tor seat.
2. Remove the tractor top link, 3-point lower lift
arms, and anti-sway links.
3. Remove three bolts from both lower 3-point arm
pivot pins, leave pins in place (Figure 2).
4. NOTE: Leave all hardware loose until sub-
frame weldment has been fit up.
Figure 2 Remove hardware from pivot pins
CAUTION