Wren Associates DRS5008 DVR User Manual


 
Advance Configuration DRS5116
Wren
2003. 09. 06 (v 1.0)
110
- Set the event recording as “On” for each time schedule.
<Note>
Whenever pressing the “Help” button, information of the displayed image is different.
The default value of the monitoring mode is to show only the channel number. Then the next step is to
show the channel name and text, event status, and HDD status.
The default value of the playback mode is to show all information. The next level is to show the
channel name and text, event status, and channel number.
So in order to view text data, press the “Help” button once at both the monitoring and playback modes.
17.2. Using Keyboard
In order to use the keyboard, the following two menus should be set; the Serial Setup’s RS232 menu
and, the Serial Setup’s PTZ menu
17.2.1. Setting at Serial Setup’s COM1 Menu
- Set RS232 (COM1)’s device menu as “Keyboard”. Then set the baud rate, parity, stop, and data.
17.2.2. Setting at Serial Setup’s PTZ Menu
- Set the PTZ camera to control with the keyboard. For more detailed technical solution, please contact
the closest local distributor.