Filter
Top Products
Basic Configuration DRS5116
Wren
2003. 09. 06 (v 1.0)
88
menu is used to set input text information. For text recording, the “COM1” port should be also set in
the “System
Æ
Serial Setup” menu.
Sync Text With
This function is used to set the channel to synchronize with text.
Seek Header
If a protocol is built in DRS, like Star Finger 007, this setting is needless. Otherwise,the DRS cannot
recognize which parameter value is inputed to theDRS. All information has a starting point and ending
point. The header means that the starting point is always inserted. So when this header data is
transmitted, the DRS can recognize it as the starting point. A maximum of two headers can be set.
Delimiter
Because the delimiter value may be different, refer to the manual of the related device
Timeout (ms)
The following “Lines” mean maximal text line that can be included within a data. However, the length
of each data may be different Because the DRS cannot recognize it automatically, the timeout menu is
needed. If specific time passes after the DRS receives the last line, the DRS will regard it as normal data
and decide to record.
Lines
Lines are used to set maximal line of a data.
16.4.4. Setting Global Alarm Recording
This screen is used to set all analog channesl bythe same condition.