Filter
Top Products
Basic Configuration DRS5116
Wren
2003. 09. 06 (v 1.0)
62
Basic Configuration
14. Monitoring
Once power is applied to the DRS Digital Recording Solution, all connected channels will be displayed
by the 4/8/16 split monitoring mode. The following steps apply for all DRS Digital Recording
Solution’s monitoring menus.
14.1. Viewing Basic Screen (Quad-
Split)
- Insert the AC cord’s plug in a wall outlet, and
apply power to the unit. The LED will come on
and the DRS will start booting.
- After start-up, the basic screen (quad/split) is
displayed.
- If user password is set, a dialogue box for
entering the password will appear.
14.2. Viewing Single Full Screen
- Press the desired channel number button on the
front panel of the DRS.
- To return to the multi-view screen, press the
[MULTI] button.
14.3. Viewing Multi Screen
- Press the [MULTI] button to view several
channels simultaneously.
- To change the split screen configuration, press
the [MULTI] button. 4 / 9 / 16 / 13 split screens will be displayed.