Xoro HTC1900D Flat Panel Television User Manual


 
39
English
DVB-T OPERATION GUIDE
To move a channel, select the MOVE column of a
channel and press ENTER. Use UP or DOWN to
change the placement order of the channel, and
ENTER to confirm the change.
Select the DELETE column and press ENTER to
delete the channel.
Use TV/RADIO to change between TV and radio
channels.
Note:
If there are no channels available, the user
can not enter this menu.
Book list
With this function, you can set a bookmark for a
certain TV-Channel. In this case, the TV set will
switch to the bookmarked channel at the
programed time. With this function you can avoid
missing the beginning of an important show on TV.
Choose submenu "Book List" using ENTER key.
The table shown on the right side will be
displayed. Press the right navigation key to go to
the settings.
Enter Channel No, date, start- and end-
timeattributes and service type and confirm
selection by pressing ENTER key.
Once the programmed time is reached, the TV will
ask for TV cannel change, and in case you do not
cancel, the TV will switch to the programmed TV
channel after 10 seconds.
Note:
This function cannot be used in standby mode.
10.
Nr. Service Event Start-Time End-
Time