Filter
Top Products
40 En
ENJOYING SURROUND SOUND
Signals input from 2-channel sources can also be played
back on multi-channels.
1 Press AMP and then press STANDARD on
the remote control repeatedly to switch
between the “SUR. STANDARD” and “SUR.
ENHANCED” programs or press MOVIE to
select the “MOVIE THEATER” programs.
2 Press SELECT on the remote control
repeatedly to select the desired decoder.
You can select from the following modes depending on the
type of source you are playing and your personal
preference.
y
You can also select a decoder by pressing j / i on the remote
control while the decoder type is displayed in the front panel
display.
The Pro Logic IIx decoder is not available when “SUR. B” is set
to “NONE” (see page 82).
Enjoying 2-channel sources in
surround
AMP
STANDARD
5
MOVIE
4
or
SELECT
6
SUR. STANDARD Functions
PRO LOGIC
Dolby Pro Logic processing for any
sources
PLII Movie
Dolby Pro Logic II processing for
movie sources
PLII Music
Dolby Pro Logic II processing for
music sources
PLII Game
Dolby Pro Logic II processing for
game sources
PLIIx Movie
Dolby Pro Logic IIx processing for
movie sources
PLIIx Music
Dolby Pro Logic IIx processing for
music sources
PLIIx Game
Dolby Pro Logic IIx processing for
game sources
Neo:6 Cinema
DTS processing for movie sources
Neo:6 Music
DTS processing for music sources
SUR. ENHANCED
or
MOVIE THEATER
Functions
PRO LOGIC
Dolby Pro Logic processing for any
sources
PLII Movie
Dolby Pro Logic II processing for
movie sources
PLIIx Movie
Dolby Pro Logic IIx processing for
movie sources
Neo:6 Cinema
DTS processing for movie sources
Note