Filter
Top Products
86 En
SET MENU
3 Press u / d to select the character you want
to use and then press j / i to move to the
next space.
• You can use up to 8 characters for each input.
•Press d to change the character in the following order, or
press u to go in the reverse order:
A to Z, a space, 0 to 9, a space, a to z, a space, symbols (#,
*, –, +, etc.)
4 Repeat steps 1 through 3 to rename each
input source.
5 Press SET MENU on the remote control to
exit from “INPUT RENAME”.
■ Volume Trim D)VOLUME TRIM
Use this feature to adjust the level of the signal input at
each jack. This is useful if you want to balance the level of
each input source to avoid sudden changes in volume
when switching between input sources.
Choices: CD, MD/CD-R, TUNER, DVD, DTV/CBL,
V-AUX, DVR, MULTI CH IN
Control range: –6.0 to 6.0 dB
Control step: 1.0 dB
Initial setting: 0.0 dB
Use this menu to perform the DAB operations as well as
the DAB ensemble/service registry list. See page 61 for
details about this menu.
■ Initial scan A) INIT SCAN
See page 62 for details.
■ Tuning aid B) TUNE AID
See page 63 for details.
■ DRC mode C) DRC MODE
See page 63 for details.
■ Prune list D) PRUNE LIST
See page 64 for details.
■ Preset delete E) PRESET DEL
See page 65 for details.
Notes
PRESET/CH
ENTER
A/B/C/D/E A/B/C/D/E
PRESET/CH
ENTER
A/B/C/D/E A/B/C/D/E
PRESET/CH
ENTER
A/B/C/D/E A/B/C/D/E
SET MENU
SRCH MODE
MENU
3 DAB MENU