Filter
Top Products
ADVANCED SETUP
88 En
This unit has additional menus that are displayed in the front panel display. The advanced setup menu offers additional
operations to adjust and customize the way this unit operates. Change the initial settings (indicated in bold under each
parameter) to reflect the needs of your listening environment.
• The settings you make are reflected next time you turn on this unit by pressing STANDBY/ON on the front panel (or POWER on the
remote control) to turn on this unit (see page 25).
• Only STANDBY/ON, STRAIGHT (EFFECT) and the PROGRAM l / h buttons are effective while you are using the advanced
setup menu.
• All the other operations cannot be made while you are using the advanced setup menu.
• The advanced setup menu is only available in the front panel display.
1 Press STANDBY/ON on the front panel to set
this unit to the standby mode.
2 Press and hold STRAIGHT (EFFECT) on the
front panel and then press STANDBY/ON to
turn on this unit.
This unit turns on, and the advanced setup menu
appears in the front panel display.
3 Press the PROGRAM l / h buttons on the
front panel repeatedly to select the
parameter you want to adjust.
The name of the selected parameter appears in the
front panel display.
See page 89 for a complete list of available
parameters.
4 Press STRAIGHT (EFFECT) on the front
panel repeatedly to change the selected
parameter setting.
5 Press STANDBY/ON on the front panel to
save the new setting and set this unit to the
standby mode.
y
The settings you made are reflected next time you turn on
this unit.
ADVANCED SETUP
Notes
VIDEO PORTABLEL AUDIO R
VIDEO AUX
STANDBY
/ON
DISPLAY
AUTO/MAN'L
TUNING MODE
MAN'L/AUTO FM
MEMORY
LEVEL
l
PRESET/TUNING
h
NEXT
A/B/C/D/E
DAB
FM/AM
EDIT
SEARCH MODE
PRESET/TUNING
VOLUME
BASS/TREBLE
TONE CONTROL
l PROGRAM h
EFFECT
STRAIGHT
SILENT CINEMA
PHONES
BA
SPEAKERS
MULTI CH
INPUT
INPUT MODE
INPUT
3
2,4
1-2,5
STANDBY
/ON
STANDBY
/ON
EFFECT
STRAIGHT
While holding
down
l PROGRAM h
SP IMP.-8 MIN
Currently selected
parameter setting
Currently selected
parameter
EFFECT
STRAIGHT
STANDBY
/ON