Filter
Top Products
15
DisklavierTV User’s Guide (For Disklavier E3 and DKC-850 Users)
Preparation
3
Scroll down through the screens and select “Firmware U” using the cursor button
([▼]), then press [ENTER].
-----------------------
*Firmware U
=Update=
*Cancel
=?
The download process of the update program starts.
Now Downloading...
50% ( 1 / 1 )
=Update=
4
After the download process is completed, shut down the Disklavier with [ON/OFF]
on the control unit.
Turn OFF,Turn ON again
while holding [PLAY]
=Update= ?
The update program is now prepared.
5
Holding [PLAY/PAUSE] on the control unit, press [ON/OFF].
Hold
+
CTRL system v3.30
(ENT)*UPDATE
The current version information of each module appears one after the other.
6
Press [ENTER] on the control unit.
The starting screen appears.
REWRITE SYSTEM PROGRAM
(ENT)
(Center of the button)
7
Press [ENTER] on the control unit again.
After a while, the update confirmation message of each module appears.
v3.30
(PLAY,STOP)MC -SURE?
v3.50]
(Center of the button)
Updated version
(v3.50 or later for Disklavier E3;
v3.52 or later for DKC-850)