Getting Started
3
1 Open the battery compartment.
2 Insert two batteries type R06 or AA,
following the indications (+ -) inside the
compartment.
3 Close the cover.
Using the remote control
4
S
Connect the AC power cord to the power
outlet.
Turn on the TV and your AV receiver.
Select the appropriate input source at the
AV receiver that was used to connect to
this unit. Refer to the equipment owner's
manual for detail.
Turn this unit on.
Set the TV to the correct Video IN
channel. (e.g. EXT1, EXT2, AV1, AV2,
AUDIO/VIDEO, etc. Refer to your TV
owner's manual for derail)
The front display lights up and the
default screen appears on the TV.
Point the remote con_
at the sensor, within /
approximately 6 m / \
(20 feet) of the uii_
(,;,;:5
io_ooi
L J
Handling the remote control
• Do not spill water or other liquids on
the remote control.
• Do not drop the remote control.
• Do not leave or store the remote
control in the following types of
conditions:
- high humidity such as near a bath
- high temperature such as near a heater
or stove
- extremely low temperature
- dusty places
This DVD Player is compatible with both
NTSC and PAL. Select the color system
that matches your TV.
TV TYPE
1 Press SETUP,
2 Press • repeatedly to select {VIDEO
SETUP PAGE}.
3 Press J,V to highlight {TV TYPE}, then
press •.