Filter
Top Products
Disc Operations
The SA-CD standard is based on Direct
Stream Digital (DSD) technology. This
new direct-stream digital format
comprises a 1-bit system that has a digital
sampling frequency that is 64 times higher
than that of conventional audio CD.
There are three types of SA-CD discs:
single-layer, duaMayer and hybrid discs.
Each type may contain two areas of
recorded information: a High Quality
Stereo area and a High Quality Multi-
channel area.
- A single layer disc can contain both
information areas.
- A dual layer disc can contain both
information areas. Double the
information can be stored on the disc,
thanks to the second layer.
- A hybrid disc can contain both
information areas, and also a second,
standard CD layer, making it playable on
standard CD players.
Playing a disc
1 Load a disc.
Playback starts automatically.
•"_The TV screen will display the current
playing status and current playing track
list in the area.
2 Playback will stop at the end of the disc.
3 To stop playback, press STOP II.
Changing SA-CD playback area
and layer
You can change the SA-CD playback area
by pressing the SOUND MODE button,
and change the playback layer by pressing
the AUDIO button.
• On hybrid discs (with SA-CD and CD
layers), the player will always start
playing the SA-CD layer (multi channel
area).
• You can change between SA-CD multi
channel and SA-CD stereo area by
pressing SOUND MODE (depending
on availability of the mode on the disc).
or
1 Press _ and select the folder using
AV, then Press ENTER/OK.
2 Press A_I' to select a track.
3 Press ENTER/OK to confirm.
• To switch between the SA-CD layer
and the CD layer, press the AUDIO
button while playback is stopped.
• The SA-CD indicator lights only when
the SA-CD layer is selected.
Notes:
- SA-CD Text is nat supported.
- You can not change the Analog output
setting during SA-CD playback (see
page 24 "'Audio Setup Menu").
18