21
DVR HOOKUP
Before Operation
Progressive Scan
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the COMPONENT VIDEO OUT jacks,
but are connecting the DVD recorder to a standard
(analog) television, set Progressive Scan to OFF.
If you are using the COMPONENT VIDEO OUT jacks
for connection to a TV or monitor that is compatible with
a progressive scan signal, set Progressive Scan to ON.
Caution
Once the setting for progressive scan output is entered,
an image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan to
ON in error, you must reset the unit. First, remove the
disc in the DVD Recorder. Next, press STOP (x) again
and hold it for five seconds before releasing it. The
video output will be restored to the standard setting,
and a picture will once again be visible on a convention-
al analog TV or monitor.
PBC
The PBC setting can be changed. Set Playback Control
(PBC) to ON or OFF.
ON: Video CDs with PBC are played according to the PBC.
OFF:
Video CDs with PBC are played the same way as Audio
CDs.
Set Initialize
If you need to, you can reset the recorder to all its facto-
ry settings. Select “SET” then press ENTER.
ote
Some options can not be reset. (Rating, Password, Country
Code, OSD Language, and Progressive San)
Language
Disc Language
Select a language for the disc’s Menu, Audio, and Subtitle.
Original : The original language set for the disc is selected.
Other : To select another language, select Other option then
press ENTER. Use the numbered and ENTER buttons to key-
in the corresponding 4-digit number according to the language
code list on page 47. If you a mistake before pressing ENTER,
press b repeatedly to delete one by one and correct it.
OSD Language
Select a language for the Setup menu and on-screen
display.
Prog. Scan
Prev. Select
Prog. Scan
Prev. Select
Prev. Select
Prev. Select
Prog. Scan
Prev. Select