Zenith DVR313 DVD Recorder User Manual


 
Before Operation (Continued)
Auto Chapter
When recording in Video mode, chapter markers are put
in every three minutes on the default setting. You can
change this interval to 3 minutes, 5 minutes or 10 min-
utes. If you select Not Use, switch off automatic chapter
marking altogether with the No Separation setting
DV Rec Audio
You need to set this if you have a camcorder using
32kHz/12-bit sound connected to the front panel DV IN
jack.
Some digital camcorders have two stereo tracks for
audio. One is recorded at the time of shooting; the other
is for overdubbing after shooting.
On the Audio 1 setting, the sound that was recorded
while shooting is used.
On the Audio 2 setting, the overdubbed sound is used.
Disc
Initialize
If youre recording on a DVD-R disc, the recording mode
will always be Video mode.
If you are using a DVD-RW disc, by default it will be VR
mode. You can change this to Video mode from the
Setup menu.
11
Press SETUP.
The Setup menu appears.
22
Use v / V to select the Disc option.
33
While the Disc option is selected, press B to
move to the second level.
44
Use v / V to select the Initialize option.
55
Press B to move to the third level.
Start icon is highlighted.
66
Press ENTER.
Disc Initialize menu appears.
77
Use b / B to select a desired Initialize Mode
(VR Mode or Video Mode) then press ENTER.
It takes a few moments to initialize the disc.
Caution
If you want to change the disc format, everything
recorded on the disc will be erased.
88
Press SETUP to exit the menu.
Protection
When recording in VR mode, set to ON to prevent acci-
dental recording, editing or erasing of the disc loaded. If
you need to unlock the disc to make edits, select OFF.
DVR HOOKUP
25
Audio 1
Audio 2
Setup
Language
Audio
Lock
Recording
Disc
Rec Mode Set
Rec Aspect
Auto Chapter
DV Rec Audio
Prev. Select
Setup
Language
Audio
Lock
Recording
Disc
Rec Mode Set
Rec Aspect
Auto Chapter
DV Rec Audio
Prev. Select
Not Use
3 Min
5 Min
10 Min
Start
Setup
Language
Audio
Lock
Recording
Disc
Initialize
Finalize
Disc Name
Protection
Prev. Select
Video Mode
Select a Mode
Disc Initialize
VR Mode
OFF
ON
Setup
Language
Audio
Lock
Recording
Disc
Initialize
Finalize
Disc Name
Protection
Prev. Select