Filter
Top Products
Installer Menus
Page 31
Use the Installer’s Menus to make TV operation adjustments.
Accessing the Installer’s Menu
Installer’s menus can be accessed by using the optional
installer’s remote control. Just press and hold MENU (about
8 seconds) until the display changes, then press 9, 8, 7, 6,
then ENTER. To exit the Installer’s Menu, press ENTER
again. Changes you make will be stored in nonvolatile
memory.
The Installer’s Menu opens with item 00-I, INST. SEQ. Use
the SELECT key to sequence through the available menu
items. Or, access an item directly by entering the line
number, then pressing MENU. For example, to access the
Start Channel option which is on line 11, press 11, then
MENU. To change a current setting use the Left/Right ADJ
keys.
Using the Installer’s Menu
Items 00-90 are immediately accessible only upon entering
the Installer’s Menu. Their numbers, descriptions, ranges,
factory default settings, and a place for listing any changes
made on-site are given below. A second section of the
Installer’s Menu that is intended for qualified service
technicians only is not shown (XX-F Items). Normally these
items do not require adjustment.
Items in the Installer’s Menu: 0-I to 25-I
OIMCRMIO62A 01.48 01
00-I. INST. SEQ. 0
SN:XXXX-XXXXXXXX
UPN:XXX-XXX-XXX-XXX
XX/XX/XX TE = 10110000
Menu Item Function Value Range Default Value Brief Description of Function and Comments
0-I. INSTALLER. SEQ 0 - 3 0
0 ( 9876), 1 (4321), 2 (1478), 3 (3698)
Changes installer Entry Sequece. Leave default set 0
1-I.
POWER MANA
GE 0 - 7 0 Sets number of hours of no activity before auto shutoff.
2-I. AC ON 0 / 1 0 Set to 1 to enable auto turn on at power up.
3-I. BAND/AFC 0 - 7 0 Tuning band, see detailed descriptions.
4-I. STRT CHANNEL 0 - 255 255 Channel at turn-on (255 last Ch).
5-I. CHAN LOCK 0 / 1 0 When set to 1, cannot tune from current channel.
6-I. GHOST CH 0 / 1 0 Set to 1 to enable Ghost Channel display.
7-I. START VOLUME 0 - 63, 255 255 Volume level at TV turn-on (Set 255 to retain last volume level).
8-I. MIN VOLUME 0 - 63 0 Minimum volume setting.
9-I. MAX VOLUME 0 - 63 63 Maximum volume setting.
10-I. MUTE DISABLE 0 / 1 0 Set to 1 to disable mute function.
11-I. KEY DEFEAT 0 / 1 1 Set to 1 to disable Menu, Select, and Adj keys on front panel.
12-I. IR BANKS EN. 0 / 1 0 Set to 1: enables TV to respond to IR codes to change Channel Bank directly.
13-I. SCAN MODE 0 - 3 1 Typically used for Hospitals: puts On-Off and FM in Ch Up/Down sequence.
14-I. STRT CH IN SM 0 / 1 0 Set to 1 to put TV on/off below start channel number.
15-I. SLEEP TIMER 0 / 1 1 Set to 1 to enable Sleep Timer.
16-I. EN. TIMER 0 / 1 1 Set to 1 to enable Timer.
17-I. ALARM 0 / 1 1 Set to 1 to enable Alarm.
18-I. RADIO 0 / 1 1 Set to 1 for TVs with Radio.
19-I. NOT USED
20-I. FEATURE LEVEL 0 / 1 1 Zen 1 Leave default set 1 (1 Zen 1)
21-I. V-CHIP 0 / 1 1 Set to 1 to enable V-Chip
22-I. MAX BLK HRS 0 - 99 12 Select number of Parental Control blocking hours.
23-I. CAPTION LOCK 0 / 1 0 Set to 1 to retain caption setting at turn off.
24-I. TEXT MODE 0 / 1 1 Set to 1 to add Text option to closed caption menu.
25-I. FUNCTION PRE.0 0 - 3 0 Controls channel preview in Pay-Per-View function menu.
XX-F Menu Items (Not shown
here) are service-type
adjustments and only qualified
technicians having specialized
test equipment should access
them.