Filter
Top Products
Since the Clone Programmer’s time cannot be set
directly, the time needs to be copied from a Zenith
TV equipped with M.P.I. Input capability.
Once the time is copied to the Clone programmer,
the current time can then be transferred to another
TV. (This can be a Master TV, or another TV which
has had the features already set up.)
D. Teach Master TV’s Setup to Other TV
Once Learning is complete, remove the M.P.I.
cable from the master TV and connect it to the TV
that you want to copy the master TV’s setup to.
With the “TV is Controlled by Clone” message
displayed, press 2 or use either Channel key to go
to the “Teach to TV” option, press ON/OFF,
POWER, or ENTER. Follow on-screen instructions
to transfer the Setup and other information to the
“Learning” TV. After the “Teach to TV is Complete”
message is displayed, press any key to return to
the Clone menus option, then press ON/OFF,
POWER, or ENTER. If finished, remove M.P.I.
Cable from the TV.
E. Disconnect TV Power for 5 Seconds
Remove the TV power cord of the newly “Cloned
TV” from the power outlet for about 5 seconds to
activate the newly copied
Setup.
C. Learn Setup from Master TV
Press 1 to select the “Learn From TV” option,
then press ON/OFF, POWER, or ENTER to go to
the Memory Bank Selection Menu.
Pick the Memory ”Bank” (1, 2, 3, or 4) you want
to store this Master TV’s Setup in by pressing
either Channel key repeatedly to pick Memory 1,
2, 3, or 4. (If you choose a Memory “Bank” that
already has a master TV’s setup already in it, it
will be overwritten by this Master TV’s setup.)
Once the Clone memory bank is selected, press
ON/OFF, POWER, or ENTER. The Clone
memory bank you have selected will be shown.
Press ON/OFF or POWER to begin copying the
master TV’s setup.
Ca. Set the Clock (Optional)
Set the time on the Master TV’s Clock. (If the
time has already been copied from another TV
into the Clone programmer, you can set the
Master TV’s clock by copying the time from the
Clone programmer.)
The Clone Programmer can copy the current
time to both a master TV and to the Clone’s
internal clock; accurate to within one minute.
(Another reason that the Clone programmer
should be equipped with fresh, high-quality
alkaline batteries is for it to keep the time as
accurately as possible.)
Clone Selection Menu Choices
Page 42