A SERVICE OF

logo

*
SURFACE SECTION
18.52
*
SURFACE SECTION: Specify section proper ties for surface elements.
This option is usedto specify asurface element cross-section. It must be used inconjunction with the
*
REBAR
LAYER option.
Products: ABAQUS/Standard ABAQUS/Explicit
Type: Model data
Level: Part, Part instance
References:
“Surface elements,” Section 26.7.1 of the ABAQUS Analysis User’s Manual
“Defining reinforcement,” Section 2.2.3 of the ABAQUS Analysis User’s Manual
*
REBAR LAYER
Required parameter:
ELSET
Set this parameter equal to the name of the element set containing the surfac e elements for which
the section proper ties are being defined.
Optional parameter:
DENSITY
Set this parameter equal to the mass density per unit area of the surface element section.
There are no data lines associated with this option.
18.52–1
ABAQUS Version 6.1 Module:
ID:
Printed on: