A SERVICE OF

logo

Open as PDF
next previous
3 — OPERATION
3-3
ON/OFF Switch
The ON/OFF switch is used to turn the battery power on or off to the lift. Turning the
switch to the
ON position activates the Audio Program ‘Hal’ and turns power on to the lift.
To conserve battery power, the switch should be in the
OFF position when the lift is not
being used. Refer to Figure 3-3.
Figure 3-3. ON/OFF Switch
Laser Pointer
The laser pointer is used to help position the lift before it is raised. It is mounted on the
side of the cage. To help position the lift before setting outriggers, turn the laser pointer
ON and place it in its holder in an upright position. When the red dot from laser pointer is
in the area where you want to work, this is the position you want the Odyssey 34 lift to be
located before setting the outriggers. Refer to Figure 3-4.
HOLDER
LASER
POINTER
Figure 3-4. Laser Pointer