A SERVICE OF

logo

Open as PDF
next previous
ODYSSEY 34
4-4
2. Grease both wheels and axles at the grease fittings on each wheel semiannually
with wheel bearing grease. Refer to Figure 4-2.
Figure 4-2. Wheel and Axle Lubrication
3. Lubricate the steel mast slides with dry silicone spray semiannually. Apply a
light spray coating to the slide surfaces as shown in Figure 4-3.
Figure 4-3. Steel Mast Slide Lubrication
NOTE: The plastic slide blocks in the mast are made of a bearing material which
has a high degree of lubricity and need only be kept clean. However,
precautions should be taken to ensure that the paths along which the
blocks move are kept clean and lightly lubricated with a dry type silicon
lubricant.