Copying
4-13
Selecting Paper Source
1
Set originals.
For details, see “Placing Originals,” on p. 2-4.
2
Press (Main Menu).
3
Use [▼], [▲] or (Scroll Wheel) to select
<Copy>, then press [OK].
4
Load the paper into the stack bypass tray.
5
Use [▼], [▲] or (Scroll Wheel) to select
<Custom Size>, then press [OK].
6
Press [OK] to select the horizontal length
<X>.
Using Stack Bypass Tray with Irregular Sizes of Paper
This section describes how to copy onto non-standard-sized paper using the stack bypass tray.
If <Stack Bypass Paper (Std.)> setting in <Paper Settings> from the Additional Functions screen is set to <O>, the paper size/type
setting screen appears when you load paper in the stack bypass tray. If <Stack Bypass Paper (Std.)> is set to <On>, copying can be
performed only for the registered paper size and type. (See “Setting Paper Size and Type,” on p. 2-22.)
