Printing
7-21
Printing from Memory Media (Direct Print)
7
Press the left Any key to select <Display/
Select>.
8
Use [▼], [▲] or (Scroll Wheel) to select
<Change File Selection>, then press [OK].
9
Use [▼], [▲] or (Scroll Wheel) to select
<Specify Conditions>, then press [OK].
10
Press [OK] to select <Select All>.
11
Use [▼], [▲] or (Scroll Wheel) to select
the desired setting, then press [OK].
For details about <Print Settings>, see step 9 in
“Printing from Memory Media,” on p. 7-15.
12
Press (Start) to start printing.
When printing is complete, remove the memory
medium.
Do not remove the memory medium when the
access lamp is blinking. The blinking lamp
indicates that the machine is accessing the data in
the memory medium. The data may be damaged
if you remove the memory medium at this point.
