Printing
7-18
Printing from Memory Media (Direct Print)
■ If you select <Layout>:
The print quantity is limited to one.
Only JPEG data can be printed. Even if the
selected les contain TIFF data, only JPEG data
is printed.
The print size is adjusted automatically to t on
one sheet of paper.
The order of the images in the layout cannot
be specied.
This setting cannot be used with two-sided
printing.
A blank space for printing the date and le
name is left below the printed image even if
<Print Date> or <Print File Name> is set to
<O>.
–
–
–
–
–
–
① Use [▼], [▲] or (Scroll Wheel) to select
the layout type, then press [OK].
② Use [▼], [▲] or (Scroll Wheel) to select
<Yes>, then press [OK].
■ If you select <Print Date> or <Print File
Name>:
Only JPEG data can be printed. Even if the
selected les contain TIFF data, only JPEG data
is printed.
The le name can consist of up to 20
characters.
–
–
① Use [▼], [▲] or (Scroll Wheel) to select
<On>, then press [OK].
10
Press to start printing.
When printing is complete, remove the memory
medium.
Do not remove the memory medium when the
access lamp is blinking. The blinking lamp
indicates that the machine is accessing the data in
the memory medium. The data may be damaged
if you remove the memory medium at this point.
