R-104
Manager Operation
3-3-15. Customer busy reset
This command is used to release the busy flag of the customer used by other dead terminal.
Executing this command always releases this flag, so please be careful to perform this
operation.
1. Sign on a clerk (if necessary).
2. Press <MODE> and <Manager> to assign manager mode.
3. Select “15. Customer Busy Reset” and press the <YES> key.
4. Enter the appropriate customer number, and then select
“YES” to execute this command.
Customer Busy Reset
Cust No.
OK? YES
0.00
MGR
C
01 10-10-01 12:34 000000
Manager Mode
9.Error Log Print
↑
10.System Re-configuration
11.Item Data Capture
12.EURO Change over
13.Clerk Window
14.Customer
15.Customer Busy Reset
16.Recording
0.00
Busy Reset
CUST No.
123456
Dr.
Big Scientist
BALANCE
$45.90
DISCOUNT $3.23
RECEIPT
3-3-16. Sound
This command is used to play the programmed sound file or to record to the sound file.
1. Sign on a clerk (if necessary).
2. Press <MODE> and <Manager> to assign manager mode.
3. Select “16. Recording” and press the <YES> key.
4. Enter the appropriate sound file, press <YES> to play, press
<NO> to record.
MGR
C
01 10-10-01 12:34 000000
Manager Mode
9.Error Log Print
↑
10.System Re-configuration
11.Item Data Capture
12.EURO Change over
13.Clerk Window
14.Customer
15.Customer Busy Reset
16.Recording
↓
0.00
Recording
WAV File
1.Sound (1)
2.Sound (2)
3.Sound (3)
4.Sound (4)
5.Sound (5)
6.Sound (6)
7.Sound (7)
8.Sound (8) ↓
0.00
