A SERVICE OF

logo

R-97
QT-6600 Reference Manual
3-3-8. Order ID change
This command is used to change the target printer of order temporarily.
1. Sign on a clerk (if necessary).
2. Press <MODE> and <Manager> to assign manager mode.
3. Select 8. Order ID Change and press the <YES> key.
4. Select YES of the Definition Enable field, and enter an
appropriate ID number of each order printer and press the
<YES> key. Select YES of the last line to execute this
command.
Note: D
4
D
3
D
2
D
1
In case of RS-232C printer,
D
4
D
3
: Terminal ID number which connects with the printer.
D
2
D
1
: 01 = Printer 1, 02 = Printer 2, 03 = Printer 3
In case of LAN printer,
D
4
D
3
: Terminal ID number which sends data to the printer.
D
2
D
1
: 11 ~ 26 = Printer 1 ~ 16
MGR
C
01 10-10-01 12:34 000000
Manager Mode
1.System Connection Check
2.Remote On
3.Remote Off
4.Busy Reset
5.Stock Maintenance
6.Drawer for Clerk
7.CHK#(CLK Interrupt)
8.Order ID Change
0.00
Order ID Change
Definition Enable YES
1.Order1 0103
2.Order2 0202
3.Order3 0203
4.Order4 0104
:
15.Order15 0000
16.Order16 0000
OK? YES
0.00
D
4
D
3
D
2
D
1