MAGNUM 6K SWITCHES, MNS-6K USER GUIDE
Magnum6K25(smtp)## add id=2 email=jsmith@garrettcom.com traps=S events=CF
ip=192.168.10.13
Recipient successfully added
Magnum6K25(smtp)## show smtp recipients
ID E-mail Address SMTP Server Port Traps Events
===========================================================
1 rk@gci,sys@gci.com 67.109.247.195 25 All All
2 jsmith@gci.com 192.168.10.13 25 S CF
3 -- -- -- -- --
4 -- -- -- -- --
5 -- -- -- -- --
Magnum6K25(smtp)## sendmail server=10.21.1.2 to=jack@garrettcom.com
from=support@garrettcom.com subject=test body=hello
Magnum6K25(smtp)## smtp enable
SMTP Alert is enabled.
Magnum6K25(smtp)## sendmail server=10.21.1.2 to=jack@garrettcom.com
from=support@garrettcom.com subject=test body=hello
Magnum6K25(smtp)## show smtp config
SMTP Global Configuration
========================================
Status : Enabled
SMTP Server IP : 67.109.247.195
SMTP Server Port : 25
Retry Count : 3
Magnum6K25(smtp)## smtp disable
SMTP Alert is disabled.
Magnum6K25(smtp)## show smtp config
SMTP Global Configuration
========================================
Status : Disabled
SMTP Server IP : 67.109.247.195
SMTP Server Port : 25
Retry Count : 3
Magnum6K25(smtp)## exit
A test email is sent to Jack to test email connectivity.
This email will not work as SMTP was disabled.
The sendmail command after SMTP is enabled will
work.
smith will receive Critical and Fatal SNMP traps on a
different SMTP server than the other users. You may
want to do that if you expect a higher traffic load and
don’t want to throttle a SMTP server
264
