INSTEON 2412N Manual

A SERVICE OF

next previous

12

®

Rev. 6/19/2012 11:45 AM

Adding and Controlling an IP Camera from SmartLinc

1. Log onto http://smartlinc.smarthome.com and click the Room Settings icon (cube with a wrench).

2. Next to the room in which the camera is located, click Add URL to Room.

3. Type in the camera’s access URL. Example: http://192.168.0.200:80/ImageViewer?Mode. Note

that there is usually a URL extension that allows you to only view the camera image, such as

/ImageViewer?Mode in the example.

4. ClickSaveandTest.TheSmartLincinterfacewillndandsynchronizethecamerafeedandthe

camera image will load on the room’s control page.

If you have a Smarthome Wireless IP Security Camera (75790) or a Panasonic Plug & Play Camera

(971363),youcanviewlivecamerafeedsthroughtheSmartLincinterface.

Adding a Timer to a SmartLinc Scene

1. Log onto http://smartlinc.smarthome.com and

select the room and then the scene for which

you want to set the timer.

2. To set the time at which you want the scene to

activate,scrolldowntotheOnTimeeld.

•Manuallyenterthetime(hh:mmformat)and

select “AM” or “PM.”

•Orselect“Sunrise”or“Sunset,”whichwill

automatically sync based on your location (see

Setting Up SmartLinc).

3. To set the time at which you want the scene to

deactivate,scrolldowntotheOffTimeeld.

•Manuallyenterthetime(hh:mmformat)and

select “AM” or “PM.”

You can set an automatic on/off timer for each scene you program in SmartLinc.