A SERVICE OF

logo

Open as PDF
next previous
14
®
Rev. 6/19/2012 11:45 AM
Restoring Power to SmartLinc
Like most INSTEON devices, SmartLinc stores all of its settings (including links) in its internal non-
volatile memory. All settings will be retained in the event of a power failure. Once power is restored,
SmartLinc will return all its connected loads to their previous states before the power loss occurred.
Resetting SmartLinc to Factory Default Settings
If you forgot your SmartLinc password or changed your network settings, perform a connection reset
to reenable DHCP, reset the port to 80 and disable SmartLinc authentication. All of SmartLinc’s
memory (links, scene/room names, etc.) will be preserved.
Connection Reset
1. Press and hold SmartLinc’s Set button for 5
seconds. Status LED will begin blinking.
2. TapSetbuttonvetimes.Status LED will stop
blinking and turn on solid.
WhenyourstpoweronSmartLinc(orafterperformingafactoryreset),itstexteldsarepre-
populated with commonly used room/scene names, a timer and example scenes. To erase all these
options and start from a “clean slate,” follow these instructions.
Clear Room/Scene Names, Timers, Cameras and Check Boxes
1. Log onto http://smartlinc.smarthome.com and
click the Settings icon (wrench).
2. Click Authentication.
3. Click:
•ClearAllLabelstoclearroom/scenenames.
•ClearAllTimerstoclearallon/offscenetimers.
•ClearAllURLstoclearallIPcamerafeeds.
•ResetAllCheckBoxestohideallbutasingle
room and scene and expose controls (on, off,
brighten and dim) for all scenes.
Factory Reset Web Interface
1. OnyourPC,downloadandsavethe.binle“SmartLincDefaultWebPages”(locatedathttp://
www.smarthome.com/les/2412n_js2.3.bin).Thislecontainsthefactorydefaultsettingsforboth
the JavaScript and HTML versions of the SmartLinc web interface.
2. From your browser, log onto http://smartlinc.smarthome.com.
3. Click the Settings icon (wrench).
4. ClickChangeApplicationVersion.
5. ClickBrowse,thenselectthe.binleyoujustdownloaded.
6. ClickUpload.Whennished,theconrmationscreenwilldisplay“MPFSUpdateSuccessful.”
7. Click Site Main Page.