A SERVICE OF

logo

17
ATTACHING DRIVE CHAIN
1. Install gate brackets at each end of the gate with U-bolts provided.
Do not fully tighten at this time.
2. Attach a chain take up bolt to one end of the drive chain using a #50
connecting link.
3. Install spring fittings into gate brackets using ¾” nuts and lock
washers. DO NOT
tighten.
4. Install chain take up bolt, previously attached to the chain, into
spring fitting in furthest gate bracket. Secure it in position with spring,
spring washer, and ½” elastic stop nut.
FENCE
Drive
Sprocket
Idler
sprockets
Drive
Chain
Chain Guard
Top Cover
Chain Guard
Housing
Chain Guard
Bottom Cover
Limit Assembly
Inside Operator
ELECTRICAL
ACCESS COVER
Drive
Chain