100
Setup Menu
Chapter 7 Menus
602 VITC POSITION
SEL-2
In 59.94i mode Select the line into which to insert VITC signals (SD output)
12H ... [18H] ... 20H: Any line from line 12 through line 20.
Notes
• You can insert VITC signals in two places. To insert in two places, set
both item 601 and item 602.
• In 59.94i mode (J), output of wide picture information is given priority if
OUTPUT in setup menu item 731 is set to “auto” and the VITC insertion
line is set to line 16.
• In 59.94i mode (UC), output of wide picture information is given priority
if OUTPUT in setup menu item 731 is set to “auto” and the VITC
insertion line is set to line 20.
In 50i mode Select the line into which to insert VITC signals (SD output)
9H ... [21H] ... 22H: Any line from line 9 through line 22.
Note
You can insert VITC signals in two places. To insert in two places, set
both item 601 and item 602.
605 TCG REGEN MODE Select the signal to be regenerated when the timecode generator is in the
regeneration mode.
TC&UB
: Both the timecode and user bits are regenerated.
TC: Only the timecode is regenerated.
UB: Only the user bits are regenerated.
607 U-BIT BINARY GROUP FLAG Select the user bits to be used in the timecode generated by the
timecode generator.
000 (000:not specified)
: Character set not specified.
001 (001:iso character): 8-bit characters compliant with ISO 646 and
ISO 2022.
010 (010:unassigned-1): Undefined.
011 (011:unassigned-2): Undefined.
100 (100:unassigned-3): Undefined.
101 (101:page / line): SMPTE-262M page/line multiplex system.
110 (110:unassigned-4): Undefined.
111 (111:unassigned-5): Undefined.
611 TC OUTPUT PHASE IN EE MODE Select the timecode output mode for output from the TIME CODE OUT
connector in E-E mode.
thru (through): Output the timecode input to the TIME CODE IN
connector as it is.
v-in (video input phase): Output the timecode with the same phase as
the input video signal phase.
v-out (video output phase)
: Output the timecode with the same phase
as the output video signal phase.
612 TC OUTPUT MUTING IN SEARCH
MODE
Select whether to suppress the output from the TIME CODE OUT
connector in jog/shuttle mode.
on
: Suppress.
off: Do not suppress.
651 UMID OUTPUT Select whether to output UMID in the VANC of the SDI output.
off: Do not output.
on
: Output.
See “Using UMID Data” (page 127) for more information about UMID.
652 UMID SD VANC LINE Select the line in which UMID is output when menu item 651 is set to
“on”.
12 H (12 line), 13 H (13 line), 15 H (15 line), 16 H (16 line), 17 H (17
line), 18 H (18 line), 19 H (19 line) (59.94i mode)
9 H (9 line), 10 H (10 line), 12 H (12 line), 13 H (13 line), 14 H (14 line),
15 H (15 line), 16 H (16 line), 17 H (17 line)
, 18 H (18 line) (50i
mode)
See “Using UMID Data” (page 127) for more information about UMID.
Menu items in the 600s, relating to the timecode, metadata, and UMID
Item number Item name Settings
