Filter
Top Products
14
3M 1996
3M Multimedia Projector MP8030
4-7. Input Menu
4-7-1. Selecting the Input Source
The input source is selected from the Input menu. The 3MMultimedia Projector MP8030 has an automatic
video selection function that will choose the correct video system or you can manually select the video system.
Press the left/right menu arrow (
← MENU →) or move the stick switch left/right to select the INPUT menu
and the VIDEO1/2 SYSTEM sub-menu. If you select an input source that is not connected, the start-up screen
with an error message will display. Press the menu button to remove the menu display.
VIDEO1 →
SETUP INPUT IMAGE OPT.
RGB1
RGB2
VIDEO2 →
TEST PATTERN
SYSTEM
AUTO
NTSC
PAL
SECAM
Select this option: To select:
RGB1 Computer 1 (RGB) terminal
RGB2 Computer 2 (RGB) terminal
VIDEO1 Video1 terminal (AUTO, NTSC, PAL, SECAM)
VIDEO2 Video2 terminal (AUTO, NTSC, PAL, SECAM)
TEST PATTERN Display the test pattern start up screen
4-8. Image Menu
4-8-1. Inverting the Image
The image can be inverted for ceiling mounted or rear projection applications. Press the left/right menu arrow
(
← MENU →) or move the stick switch left/right to select the IMAGE menu and the MIRROR sub-menu.
MIRROR
SETUP INPUT IMAGE OPT.
BLANK
REVEAL
MENU SIZE
→
→
→
→
NORMAL
MIRROR
H:INVERT
V:INVERT
H&V: INVERT
MESSAGE
→
Select this option: To adjust the following:
H:INVERT Invert the image horizontally
V:INVERT Invert the image vertically
H&V:INVERT Invert the image both horizontally and vertically