Filter
Top Products
12
Configuring Windows NT 4.0
Step 1 After you have installed the modem into your machine, turn on the power
and allow the system to boot normally.
Step 2 Insert the installation CD_ROM. Now go to Start-Run. Type in
“d:drivers\pciven\winnt\setupnt.exe” and click OK.
Step 3 After the program has finished unpacking the driver and setting it up, a
screen like the one shown below will be displayed.
Step 4 Remove the installation CD-ROM from the CD-ROM drive. Click Finish
to end the program and restart.
Step 5 After Windows NT restarts, go to Start-Settings-Control Panel and
double-click the Modems icon.
Step 6 When the Install New Modem screen appears, allow Windows NT to
detect your modem. Click the Next button.